How to install Natural Stone Veneer

Natural stone veneer can be applied to retaining walls, indoor or outdoor fireplaces, wall facades, and pillars. Thin stone veneers are made from real stone so they resist warping, cracking, fading, and chipping. Additionally, if they do come to be chipped or cracked nobody will observation since, unlike fabricated fake stone veneers, the color and texture of the stone goes all the way through the stone. Stone veneer is also faster and easier to apply since it is lighter and easier to handle.

Natural thin stone veneers come in a wide variety of styles and colors to choose from. They are quarried in Arizona, Lannon, Fond Du Lac, Chilton, and Michigan. Thin stone veneer is the ideal stone application since it is superior in terms of being very durable and flexible in matching nearly every style, color, and design. Stone veneers are thinner and lighter than artificial fake stone veneer and fiberglass stones.

Modular Homes Michigan

The Basics

Stone veneer factory on any covering needs the same basic methods of application. First there needs to be a moisture barrier, a frame or structure for the mortar to grip, mortar, and then the stone of your choice. The moisture wall and backbone frame are necessary components to ensure that your thin stone veneer will last a lifetime.

When installing stone Veneer to plywood, paneling, wall sheeting, wall board, or other non stone surface:

1. Cover the wall with a moisture wall that is weather defiant and protects the fundamental wood and the back of the stone veneer from moisture damage.

2. Apply a metal lath, mesh, or sheeting with galvanized nails or staples according to your local construction code. This supplies rigid preserve for the mortar to stick to which provides a firm backbone for your stones to grip.

3. Apply your mortar, and on top of that apply your selection of stone veneer with mortar in between the "joints."

4. After your mortar has hardened, naturally use a stiff brush and some water to scrape away any mortar that has found its way onto the face of your stones.

Concrete Masonry Stucco

1. As long as the masonry contains no oils, surfactants, or other chemicals on its covering and is clean and dry then you can feel free to apply the stone veneers without any prep. Just make sure that the backside of the masonry will not be exposed to a water source such has those used for retaining walls, ponds, or orchad beds.

2. If it does contain chemicals or oils naturally etch the covering with muriatic acid and score with a stiff wire brush.

3. Apply your mortar and your stone as usual.

4. If your covering has been treated with paint or other chemicals, naturally sand blast this covering away or ensue directions above and apply a wall material, metal lath, mesh, or sheeting and install stone as you would for a plywood wall.

Metal Buildings

1. install paperbacked 3/8 inch expanded metal lath to metal cladding supports. Use metal cladding supports of at least 12 to 20 gage and using 1 ¼ inches -12 pancake head super tight screws. Make sure that the screws jab at least 3.8 inch beyond the inside of the metal covering and at least every 12 inches.

2. Apply a 1/2 inch to a 3/4 scratch coat of mortar and allow it to dry at least 48 hours.

3. Apply the mortar and install the stones.

4. After the mortar had been allowed to dry at least 24 hours naturally clean any mortar stains form the face of the stones with a stiff brush and water.

Natural Thin Stone veneers

Natural stone veneers are durable and long lasting. In the long run, real stone is more prudent since it requires nearly zero maintenance, should never need to be supplanted under normal conditions, and resists cracking, fading, chipping, erosion, and weather conditions.

Thin stone is ready in a wide variety of colors and styles because it is made from natural stone. Therefore you can choose from more colors and cuts than fabricated stone.

Halquist Stone, Wisconsin's premier supplier of thin stone veneer, offers thin stone veneer that is cut from quarries in Arizona, Wisconsin, and Michigan.

How to install Natural Stone Veneer

No comments:

Post a Comment